STOP LAMP SWITCH REPLACEMENT (CAMPAIGN 092)

IMPORTANT: DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED
VEHICLES WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP
FOR ANY MAINTENANCE OR REPAIR.
IMPORTANT: WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT,
ACCESS HYUNDAI MOTOR AMERICA’S “WARRANTY VEHICLE
INFORMATION” SCREEN VIA WEBDCS TO IDENTIFY OPEN
CAMPAIGNS.
1. DESCRIPTION:
This TSB describes the procedure to remove, replace, and adjust the stop
lamp switch.
NOTE: During replacement of the Accent (MC), Elantra (HD), Tucson (JM),
Sonata (NF), Azera (TG), Veracruz (EN) and Santa Fe (CM) stop lamp
switches, do not remove the crash pad lower cover (driver’s side), but
before replacement of the Entourage (EP) stop lamp switch, the crash pad
lower cover should be removed for easy access.
NOTE: Before replacement of Entourage stop lamp switches on vehicles with
adjustable brake pedals, the stop lamp switch bracket mounting nuts and
the crash pad lower cover should be removed in advance. For the
detailed procedure, refer to the SERVICE PROCEDURE in this bulletin.
NOTE: When replacing the Santa Fe (CM) 2.7L stop lamp switches, use the
supplied service kit which includes an additional extension wire.
2. VEHICLES AFFECTED – VERIFY THAT THE VEHICLE IS IDENTIFIED AS
AFFECTED BY THE CAMPAIGN VIA WEBDCS:
Model: Accent (MC), Elantra (HD), Sonata (NF), Azera (TG), Tucson (JM),
Santa Fe (CM), Veracruz (EN), Entourage (EP).
Applicable vehicle production date range:
Model Production Range Accent (MC)
Oct. 13, 2005 ~ Mar. 31, 2006
Oct. 20, 2006 ~ Nov. 30, 2006
Tucson (JM)
Apr. 4, 2005 ~ Feb 28, 2006
Oct. 20, 2006 ~ Apr. 30, 2007
Sonata (NF)
Mar. 1, 2005 ~ Feb. 28, 2007
Elantra (HD)
Oct. 25, 2006 ~ Apr. 30, 2007
Santa Fe (CM)
Oct. 20, 2006 ~ Mar. 31, 2007
Veracruz (EN)
Dec. 26, 2006 ~ Nov. 30, 2007
Azera (TG)
Sep. 20, 2006 ~ Nov. 30, 2006
Entourage (EP)
Feb. 16, 2006 ~ Mar. 31, 2006
Oct. 20, 2006 ~ Jan. 31, 2007

Posted in Service Campaign.