TRAILER HARNESS REPLACEMENT PROCEDURE – CAMPAIGN 085

IMPORTANT: DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED
VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY AND
WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY
MAINTENANCE OR REPAIR.
IMPORTANT: WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT,
ACCESS HYUNDAI MOTOR AMERICA’S “WARRANTY VEHICLE
INFORMATION” SCREEN VIA DCS ON-LINE/WEBDCS TO IDENTIFY
OPEN CAMPAIGNS.
THIS CAMPAIGN MUST ALSO BE PERFORMED ON VEHICLES PREVIOUSLY
REPAIRED UNDER CAMPAIGN 082
DESCRIPTION:
This Bulletin provides a procedure to replace the trailer hitch module and
harness.
AFFECTED VEHICLES :
Model: 2007-2008 Santa Fe (CM) and 2007-2008 Veracruz (EN)
Affected vehicle range: Vehicles identified as affected by campaign 085 that
are equipped with previous design trailer hitch control modules. Other vehicles
equipped with a port installed or a dealer installed trailer hitch and previous
design trailer hitch control module, and vehicles equipped with trailer hitch control modules
replaced under
Campaign 082.
NOTE: PREVIOUS DESIGN TRAILER HITCH CONTROL MODULES ARE
MOUNTED ON THE REAR BUMPER BEAM. ALL PREVIOUS DESIGN
TRAILER HITCH MODULES, MUST BE REPLACED WITH MODULE THAT
MOUNT UNDER THE VEHICLE.

Posted in Service Campaign.